DimmerMaster
Shoebox Truss-Mount Dimmers
DMX or Analog
The DimmerMaster Shoeboxes are a line of very compact and rugged truss-mount dimmers with a variety of power in and out options. They all accept DMX Digital and 0-10V Analog inputs.
The DimmerMaster Shoebox truss-mount dimmers come in a variety of configurations with 1 or 4 channels and power capacities. They may be pipe or tree mounted and are perfect for tight spaces. The units accept either DMX-512 (by default) or 0 to +10VDC control signals. The starting (or single) channel is set on a thumbwheel switch, which also provides load testing and local control. A status LED indicates the presence of a DMX control signal. With both male and female XLR connectors, the control signal may be daisy-chained from pack to pack.
All dimmers in this family measure just over 7” x 5” x 4” (not including the rubber feet, U-bracket, and mounting studs) and weigh about 5 pounds.
Some “dimmable” LED bulbs flicker when dimmed with triac based dimmer packs. In some cases, this effect can be mitigated by adding parallel resistors. 4.7kΩ output resistors are available by request on the entire DimmerMaster series. We are happy test customer supplied bulbs on a Shoebox before committing to an order.
DM406-SUG
15 Amp U-Ground Inlet
1.8kW maximum total capacity
Four 1000W Dimmers
U-Ground Outlets
DM408-SUG
20 Amp Twistlock Inlet
2.4kW maximum total capacity
Four 1000W Dimmers
U-Ground Outlets
DM410-SUG
30 Amp Twistlock Inlet
3.6kW maximum total capacity
Four 1000W Dimmers
U-Ground Outlets